Godox WmicS1 Kit 1 - UHF Lavalier Microphone Wireless System
2 years warranty
- For Lectures, Streaming, Interviews
- One Transmitter with Omni Lavalier Mic
- Compact Dual-Channel Receiver
- Metal Housings, Easy-to-Read OLED Screen
- Flexible Antennas, Mono/Stereo Modes
- Adjustable RF Output Power
Godox WmicS1 Kit 1 - UHF Lavalier Microphone Wireless System
- 1x WMicS1 Pro TX
- 1x WMicS1 Pro RX
- 1x Omnidirectional Lavalier Microphone LMS-12B AXL
- 2x Belt clip
- 1x 3.5mm TRS-TRS Audio connect cable
- 1x XLR to 3.5mm Audio cable
- 1x ¼” Shoe mount Adapter
- 1x 3.5mm TRS-TRRS Audio connect cable
- 2x USB to Type-C cable
- 1x Carry case
Godox WmicS1 Kit 1 - UHF Lavalier Microphone Wireless System
Designed for mobile journalists, videographers, and vloggers, the Godox WMicS1 Pro Kit 1 is a wireless system with one lavalier microphone and a dual-channel receiver that can also be used to receive a second microphone (available separately). It delivers reliable transmission with a clear sound at a distance up to 328' and offers a complete solution for streaming or recording dialogue, interviews, lectures, and speech with one person talking—directly to a mirrorless/DSLR camera, camcorder, or mixer. Easy-to-use with plug-&-play operation, this system is well suited for mobile journalists, YouTube/Instagram creators, TikTok personalities, vloggers, and more.
This Pro version offers full metal housing on the components, an improved OLED display that is easily seen in both daylight and darkness, and adjustable antennas that allow for better positioning to improve reception.
The WMicS1 Pro Kit 1 includes one bodypack transmitter with an omnidirectional lavalier mic. It also comes with a receiver that mounts on your DSLR/mirrorless camera's shoe mount and plugs into the camera's audio input jack via the included 3.5mm TRS cable. The XLR output cable is for use with professional camcorders, while a 3.5mm TRRS cable is supplied for use with mobile devices.
The system offers 96 frequencies in the UHF range to choose from to avoid wireless signal interference. The transmitter and the receiver both operate on two AA batteries, but can also be powered via USB. If your camera doesn't have a headphone jack, you can monitor your sound via the receiver's 3.5mm headphone output while recording to ensure that you are capturing a clean signal.
Model: WMicS1 Pro TX
- Name: Body-pack Transmitter TX1
- Channel group: A/B
- Selectable Channel: 96 (group A: 48; GroupB:48)
- RF frequency: 514MHz-596MHz
- Oscillator Type: Christal Controlled PLL synthesizer
- Audio Frequency Range: 50 Hz-20KHz
- Sound delay: 12ms
- Antenna (fold 90º, rotate 360º): ¼
- Audio Input Port: 3.5mm Port
- Power Supply-USB Type-C: 5V⎓0.2A
- Power Supply-battery: Two AA batteries
- Working Temperature Range: 0ºC-50ºC
- Signal Noise Ratio: 70 dB
- Receive Sensitivity
- Material: Metal
- Distortion:
- Size: 2,5x1x7,8"
- Net Weight:0,5lb
Model: WMicS1 Pro RX
- Name: Body-pack Transmitter RX1
- Channel group: A/B
- Selectable Channel: 96 (group A: 48; GroupB:48)
- RF frequency: 514MHz-596MHz
- Oscillator Type: Christal Controlled PLL synthesizer
- Audio Frequency Range: 50 Hz-20KHz
- Sound delay: 12ms
- Antenna (fold 90º, rotate 360º): ¼
- Audio Input Port: 3.5mm Port
- Power Supply-USB Type-C: 5V⎓0.2A
- Power Supply-battery: Two AA batteries
- Working Temperature Range: 0ºC-50ºC
- Signal Noise Ratio: 70 dB
- Receive Sensitivity: -47 dBm
- Material: Metal
- Distortion: Below 0.5%
- Size: 2,5x1x7,8"
- Net Weight:0,5lb