Bright Tangerine Prodigy Air Deflector Compressor
2 years warranty
- For Prodigy Air Head
- Shoot in Severe Weather Conditions
- Accelerates Air to 300+ mph
- Powered via 2-Pin LEMO Port
- Control via 3-Pin Fischer R/S Port
- Six 1/4"-20 & Three 3/8"-16 Threads
Bright Tangerine Prodigy Air Deflector Compressor
GARANTIE
|
2 |
ANS |
Bright Tangerine Prodigy Air Head
GARANTIE
|
2 |
ANS |
Bright Tangerine Prodigy Power Cable
GARANTIE
|
1 |
AN |
Bright Tangerine Prodigy Filter
GARANTIE
|
30 |
ANS |
Bright Tangerine Prodigy Spare Glass
GARANTIE
|
30 |
ANS |
Bright Tangerine Prodigy Hose - 50cm (20")
GARANTIE
|
30 |
ANS |
Bright Tangerine Prodigy Top Flag
GARANTIE
|
2 |
ANS |
Bright Tangerine Prodigy Hose - 75cm (30")
GARANTIE
|
30 |
ANS |
Bright Tangerine +Prodigy Hose - 100cm (39")
GARANTIE
|
30 |
ANS |
Bright Tangerine Prodigy Air Deflector Compressor
- Bright Tangerine Prodigy Air Deflector Compressor
Bright Tangerine Prodigy Air Deflector Compressor
When attached to the Prodigy Air Head, the Bright Tangerine Prodigy Air Deflector Compressor filters and compresses air, accelerating it to speeds of 300+ mph to keep debris off your camera lens to film in inclement weather conditions. A 2-pin LEMO port powers the device via any industry-standard 24V power supply. It has built-in polarity switching to prevent short circuiting from damaging the device.
Control from compatible hand units or remotes can be achieved via the 3-pin Fischer run/stop port. An integrated control panel with easy-to-use buttons is at the top of the device, and a USB Type-C port is also available for future firmware updates. Six 1/4"-20 threads and three 3/8"-16 on the sides of the compressor allow you to incorporate it into your gear configuration. A safety tether point enables the attachment of a safety wire for additional security.
- Compatibility : Bright Tangerine Prodigy Air Head
- USB I/O : 1 x USB Type-C Female Input
- Control I/O : 1 x 3-Pin Fischer Run/Stop Female
- Power Input Connection : 1 x 2-Pin LEMO
- Power Source : AC Input
- DC Input Power : 24 VDC
- Mounting : 6 x 1/4"-20 Thread
- Mounting : 3 x 3/8"-16 Thread
- Color : Black
- Cable Length : Not Specified by Manufacturer
- Dimensions : 5.4 x 4.3 x 3.8"
- Weight : 2.03 lb