Godox VDS-M1 - Shotgun Microphone
Photo(s) non contractuelle(s)
zoom_out_map
chevron_left chevron_right

Godox VDS-M1 - Shotgun Microphone

1 year warranty

Product highlights
  • For Mobile Video & Indie Film
  • AA Battery or Phantom Powered
  • Cardioid & Supercardioid Polar Patterns
  • Resists RF-Induced Noise
  • Sensitive Condenser Capsule
  • XLR 3-Pin Output
Déclinaisons

Godox VDS-M1 - Shotgun Microphone

GARANTIE
1
AN
VDS-M1

Godox VDS-M3 - Shotgun Microphone

GARANTIE
2
ANS
VDS-M3

Godox VDS-M2 - Shotgun Microphone

GARANTIE
2
ANS
VDS-M2


€137.99 (tax incl.) €114.99 (tax excl.) Économisez - €39.08 (tax incl.)
€98.90 (tax incl.) €82.42 (tax excl.)
Tax included
refresh Sur Commande - Habituellement expédié entre 3 et 21 jours Le produit est en cours de réapprovisionnement et sera bientôt en stock.
Description

Godox VDS-M1 - Shotgun Microphone

In my box
  • Godox VDS-M1 Multipattern Shotgun Microphone
  • Windscreen
  • XLR to 3.5mm Mic Cable
  • 3.5mm to 1/4" Adapter
  • AA Battery
  • Carrying Bag

Godox vds m1 shotgun microphone

Whether shooting indoors or outside, the Godox VDS-M1 shotgun microphone offers mobile videographers, location sound recordists, and indie filmmakers the flexibility needed to capture clear, quality speech and ambience in a variety of situations. Its sensitive condenser capsule can be switched between cardioid and supercardioid polar patterns to control the directional characteristics for enhanced rear- or side-facing rejection.

The VDS-M1's alloy-constructed housing provides the benefits of light weight and resistance to RF interference. Connect its XLR 3-pin output to an external mic preamp and run it on phantom power, or use the supplied XLR to 3.5mm cable and 1/4" adapter to plug the mic into a camera or mixer while powering it via a single AA battery. A foam windscreen is included to help reduce wind noise.

Cardioid Polar Pattern

Cardioid mode allows the mic to pick up the sound source it is pointed at. Its heart-shaped response type enable rich, natural sound while rejecting background noise behind the mic.

Supercardioid Polar Pattern

Supercardioid is a more directional mode that rejects ambient noise from the sides of the microphone to provide focused pickup of the source. It offers increased isolation from extraneous sound and elevated resistance to feedback.

Electrostatic Condenser Head

The VDS-M1's condenser capsule is highly sensitive, so it can capture low-level sounds while maintaining low self-noise.

Alloy Construction

The durable alloy-constructed VDS-M1 protects inner components and eliminates RF-induced mic noise, thus enhancing overall audio recording quality.

XLR Output

Its balanced XLR 3-pin output connector excels in long-distance signal transmission, allowing the mic to work in wired or wireless configurations.

Wide Compatibility

The VDS-M1 includes an XLR to 3.5mm microphone cable and a 3.5mm to 1/4" adapter. As a result, it can be used with an array of devices such as cameras, camcorders, computers, portable recorders, mixers, and more.

Two Power Options

Power the mic via phantom power (9 to 52 VDC) or with the supplied AA battery.

Wind Protection

Slip the supplied foam windscreen over the mic to reduce wind noise.

Technical sheet
  • Main applications: Audio for video
  • Form Factor: Shotgun Mic / Stand / Boom Mount
  • Planned sound sources: Speech/voice-over, room ambience
  • Sound field: Mono
  • Working Principle: Line Gradient
  • Capsule: Electret condenser
  • Polar Pattern: Cardioid, Supercardioid
  • Pattern Select: Switched (adjustable on mic)
  • Orientation: End Address
  • Circuitry: Solid State
  • Buffer: None
  • High Pass Filter: None
  • Tone Control: None
  • Gain Adjustment: None
  • Indicators: None
  • On-Board Controls: On/Off, Polar Pattern
  • Windshield: Foam (included)
  • Frequency range: Cardioid: 50 Hz to 16 kHz
  • Impedance: Cardioid: 500 Ohms ± 30% at 1 kHz
  • Impedance: Supercardioid: 1600 Ohms ± 30% at 1 kHz
  • Load impedance: ≥ 1000 Ohms
  • Sensitivity: Cardioid: -45 dB
  • Sensitivity: Supercardioid: -30 dB
  • Output connectors (analog): 1 x 3-pin XLR male (on mic)
  • Output connectors (analog): 1 x 3.5 mm TS male (on detachable cable)
  • Headphone connector: None
  • Bus Power: None
  • Operating voltage: 9 to 52 V (phantom power)
  • Battery type: 1 x AA (included)
  • Black color
  • Mounting: Mic clip/stand adaptor, shock mount (with optional hardware)
  • Case Included: Soft Case
  • Filters Included: None
  • Material of construction: Metal
  • Storage temperature: 14 à 122°F
  • Dimensions: ø : 0,9 x L : 11"
  • Weight: 9,4 oz
Data sheet
VDS-M1
6952344219737
Similar product
DPA
MMC4006
refresh Sur Commande - Habituellement expédié entre 3 et 21 jours Le produit est en cours de réapprovisionnement et sera bientôt en stock.
GARANTIE
1
AN

DPA d:dicate Capsule Microphone omni, 16mm

€1,974.00

Tax included
€1,645.00 No tax