Lindy Câble de charge haute résistance USB Type A vers Lightning, 3m
2 years warranty
- High strength USB 2.0 charge and sync cable for iPhones, iPads and other Apple devices with Lightning connection
- Cotton braiding and optimized strain relief to withstand over 100,000 bending cycles
- Apple MFi-certified, uses the C89 Lightning connector
- Supplied with a complimentary hook-and-loop tie wrap to avoid cable tangling
Lindy Câble renforcé USB type C vers Lightning, charge & synchro 0.5m
GARANTIE
|
2 |
ANS |
Lindy Câble renforcé USB type C vers Lightning, charge & synchro, 1m
GARANTIE
|
2 |
ANS |
Lindy Câble renforcé USB type C vers Lightning, charge & synchro, 2m
GARANTIE
|
2 |
ANS |
Lindy Câble renforcé USB type C vers Lightning, charge & synchro, 3m
GARANTIE
|
2 |
ANS |
Lindy Câble de charge haute résistance USB TypeA vers Lightning 0.5m
GARANTIE
|
2 |
ANS |
Lindy Câble de charge haute résistance USB Type A vers Lightning, 1m
GARANTIE
|
2 |
ANS |
Lindy Câble de charge haute résistance USB Type A vers Lightning, 2m
GARANTIE
|
2 |
ANS |
Lindy Câble de charge haute résistance USB Type A vers Lightning, 3m
GARANTIE
|
2 |
ANS |
GARANTIE
|
2 |
ANS |
Lindy Câble de charge haute résistance USB Type A vers Lightning, 3m
- 3m Reinforced USB Type A to Lightning Cable
Lindy 3m Reinforced USB Type A to Lightning Cable
This range of USB 2.0 Type A to Lightning cables provide a reliable and effective charging solution for iPhones, iPads and other Apple devices, utilising not only a reinforced shielding and jacket structure but also an optimum strain relief, tested to bend over 100,000 times before failure. A revolutionary resistant yet flexible solution to preventing splitting and snapping.
The cable also comes supplied with a Lindy hook-and-loop tie wrap, providing a neat, handy solution to avoid the cable tangling.
MFi Certified
This product has been certified under the Apple MFi programme. Made for iPhone/iPad/iPod logos communicate to customers that an electronic accessory has been designed to connect specifically to iPhone, iPad or iPod, and has been certified by the developer to meet Apple performance standards.
Connectors
Connector A: USB 2.0 Type A Male
Connector B: Lightning C89 Male
Housing Material: PVC
Connector Plating: Nickel
Pin Construction: Brass
Pin Plating: Gold
Dimensions (approx.) WxDxH:
A: 40x15.6x7.8mm (1.57x0.61x0.31in)
Lightning: 37.5x10.6x6mm (1.48x0.42x0.24in)
Cable Construction
Length: 3m (9.84ft)
Standard: USB 2.0
Colour: Black
Type: Round
Jacket Diameter: 4.9mm (0.19in)
Jacket Material: PVC
Conductor Material: Tinned Copper
Conductor Gauge Power: 18AWG
Conductor Gauge Data: 24AWG
Shielding: Tinned Copper Braid
Specifications
Supported Bandwidth: 480Mbps
Minimum Bend Radius: 38mm (1.5in)
Operating Temperature: 0°C - 40°C (32°F - 104°F)
Storage Temperature: -10°C - 60°C (14°F - 140°F)