Shure BETA91A Micro statique hémi-cardioide
2 years warranty
- Wide Frequency Response
- Low-Profile Design
- Cardioid Polar Pattern
- Interchangeable Cartridge
Shure BETA91A Micro statique hémi-cardioide
- Shure Beta 91A Boundary Microphone
- Zippered Carrying Bag
Shure Beta 91A Boundary Microphone
The Shure Beta 91A is a boundary microphone that can double as a kick drum mic, as it can capture the punch and attack of low-frequency instruments such as kick (bass) drums. It features a wide frequency response well suited for capturing a variety of audio signals such as organ and piano. The flat, boundary design also aides in producing a strong, solid low-end response, as well as make it easy to mount inside of a bass drum. The Beta 91A is ideal for both recording and sound reinforcement alike.
Uniform half-cardioid polar pattern for maximum gain-before-feedback and rejection of off-axis sound
Low-profile design features integrated preamplifier and XLR connector to facilitate setup efficiency while minimizing stage clutter
Frequency response tailored for kick drum/low frequency applications with a wide dynamic range for use in high SPL environments
Two-position contour switch to maximize attack and clarity depending on application: select the flat response setting for natural sound in most applications or the Low-Mid Scoop setting for a strong low frequency punch with plenty of higher frequency attack
Furnished with zipper pouch
- Capsule : Electret Condenser
- Polar Pattern : Half-Cardioid
- Tone Adjustment : Low Cut: -7 dB at 400 kHz
- On-Board Controls : LF
- Frequency Range : 20 Hz to 20 kHz
- Maximum SPL : 155 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
- Maximum SPL : 151 dB SPL (1 kHz, 1% THD, 2.5-Kilohms Load)
- Impedance : 146 Ohms
- Sensitivity : -48.5 dBV/Pa
- Sensitivity : 3.8 mV/Pa
- Dynamic Range : 125.5 dB
- Signal-to-Noise Ratio : 64.5 dB
- Equivalent Noise Level : 29.5 dB SPL A-Weighted (Typical)
- CMRR : 55 dB
- Output Connectors (Analog) : 1 x XLR 3-Pin
- Operating Voltage : 11 to 52 V (Phantom Power)
- Operating Current Consumption : 5.4 mA
- Dimensions : H: 3.7 x W: 0.8 x L: 5.5"
- Weight : 16.6 oz